HD 1080P Dual Recorder Car Dvr , GPLUS2248 CPU With 3.0LTPS 16:9
Screen , 5V 1A Power
|Lens||170 degrees 4 φ17MM glass lens with H42 sensor|
|LCD size||3.0LTPS 16:9|
|Video Resolution||1920*1080P 25FPS 1280*720P 25FPS|
|storage card||TF (Maximum support 32GB)|
Lens 170 degrees 4 φ17MM glass lens with H42 sensor
G-sensor Built-in support
LCD size 3.0LTPS 16:9
Uter casing Zinc Alloy plus plastic
Language Russian, English, Chinese (simplified), Chinese
(Traditional), Korean, Japanese, etc.
File format AVI
Video Resolution 1920*1080P 25FPS 1280*720P 25FPS
Video Recording Format M-JPEG, Audio: AAC
Color effects standard
Continuous loop recording Seamless loop recording, do not leak
Truck switch machine Support auto ignition boot, turn off shutdown
Motion detection support
DATE hours support
Carrier media Support built-in memory (total: 1024MB)
Camera mode 12 million
Photo format JPEG
storage card TF (Maximum support 32GB)
Built-in audio support
Video Format PAL/NTSC
Current Frequency 50HZ/60HZ
USB function 1:USB-Disk
Power Interface 5V 1A
battery Built-in 200mAh
Under normal operating conditions, such as abnormal products ,
please refer to the solution :
Unable to boot :
Check the recorder and car charger connected correctly , if you
manually turned on, check the battery level is too
low needs recharging. As a result of procedural questions by
pressing the RESET Reset button to restore to factory
When the camera automatically stops recording, or do not cycle the
Due to the huge high-definition video data , it is possible because
the memory card reader could not keep pace .
Please use the high-speed TF card , such as C10 high-speed card.
Not cycle the camera is also possible that gravity sensor opens ,
the memory card are all locked files causing .
Please gravity sensor is closed, and the memory card is formatted .
Each time the camera and set the cycle is not the same :
Check to see if motion detection function, because the camera
motion detection state length of time, depending
on the screen there is no movement.
Shoot the movie is not clear :
Please check whether the stolen camera , finger print . Please
clean the lens before shooting the surface , keep the
lens clean .
Sometimes when the effect of the film shoot bad thing :
Camera effects and lighting conditions to shoot a great
relationship , such as backlighting , shun the light , the
intensity of light , and this will result in different shooting out
of the video.